Both stone and glass wool insulation properties are similar, and if they have the same density alph

A properly insulated house many outweigh the disadvantages and problems - this single investment in terms of money is small, pays off in a few years. So, thinking about the insulation process emphasizes the importance of appropriate thermal insulation material selection.
Each of the materials has its own advantages and disadvantages, and the incorporation of different structures, so the particular building structure suitable materials may be recommended alphatec holdings by a specialist. Thermal insulation materials vary in moisture resistance, fire safety level, steam and air permeability and other physical properties. Their main task is to heat isolation, but part of the materials can also be used for sound insulation. Moreover, it should also take into account the current Building Code LBN 002-01 "building envelope thermal engineering" in the insulation requirements in new construction and reconstruction of buildings.
One of the most commonly used insulation materials with wider applications in almost all building structures that require insulation is mineral wool. According to their chemical composition, mineral alphatec holdings wool insulation materials belongs to a group, and it is divided into two large groups: alphatec holdings rock wool and glass wool. Latvian prominent alphatec holdings brands whose products purchased in a wide range of online shop Būvserviss.lv is PAROC, alphatec holdings Rockwool, Isover and Knauf.
Mineral wool is universal, alphatec holdings as used in almost alphatec holdings all building structures: the external walls, internal walls, alphatec holdings partitions, floors, intermediate floors, the roof. It is not only excellent heat insulated, but also absorbs sound, so it is also used as insulation alphatec holdings space partitions. In addition, mineral wool has a low coefficient alphatec holdings of thermal conductivity - 10 cm thick layer of mineral alphatec holdings wool thermal characteristics that are equivalent to 60cm thick aerated concrete wall, 210 cm 250 cm sand-lime or concrete wall.
As mentioned the lack of ability to absorb mineral moisture, so the material alphatec holdings should be protected from condensation drench or entering it. Wet wool is no longer fulfill their heat insulation properties, but the wool dries, it comes back again. Another factor to be taken into account - in some cases, mineral fibers can cause irritation, so isolate the material from direct contact.
Mineral form of artificial fibers made from molten silicate. Wool fiber structure is amorphous, it can not be freely split in the longitudinal direction, and they have limited resistance to water and chemicals. Contains a little resin, various refined mineral dust reduction, as well as water-repellent substances. Mineral products do not burn, rot, does not absorb smells, does not encourage bacterial or mold growth. These products during operation do not change their shape and do not settle.
Stone wool raw materials are natural stone basalt, diabase, gabbro, amfibolīti limestone and shale. Raw material melted in the furnace at a temperature of 1500 degrees. Manufacturing process produces molten rock material fiber strands, of which forms a different alphatec holdings density boards or roll materials with different thickness of the product. Cross sectioning can observe that most fiber horizontally in the basement, while the other part - vertically, forming alphatec holdings mechanically stable alphatec holdings macrostructure to be able to resist mechanical stress. This structure is resistant to mechanical alphatec holdings stress. In addition, fiber does not move to 1000 C and higher temperatures. The wool can be formed as a different density and thickness of the plates or roll insulation material alphatec holdings of a different design. Stone wool is made from soft slabs of light construction alphatec holdings walls, partition walls, attic and roof and floor thermal insulation.
Glass wool is the main raw material is silica alphatec holdings sand and recycled glass. Manufacturing principle is similar to that of rock wool, but the melting temperature is lower - 600-700 degrees, resulting in the glass fiber is longer, the material - a more flexible and lighter. It connects with synthetic binders and subjected to a heat treatment resulting finished product. Glass wool used in different density board and roll manufacture of the material to be used on both heat and sound insulation. alphatec holdings Stiklvate is also resistant to vibrations, so it is used in piping for technical insulation.
Both stone and glass wool insulation properties are similar, and if they have the same density alphatec holdings fiber material between them was significant difference in terms of character or use. Only a small difference is that the mineral wool fire level is slightly higher than glass wool.
Comment You May use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code > <DEL datetime=""> <em> <i> <q cite=""> <strike> <strong>
Recent news new insulated alphatec holdings effective solution to