Making equipments technoinox and instruments sterile (Sterilzation) currently used physical methods

Making equipments technoinox and instruments sterile (Sterilzation) currently used physical methods (Physical Method). 1 steaming with hot vapor pressure technoinox (Steam sterilization) 2. Sterilized by heating high. one (Dry heat Sterilization) technoinox and chemical (Chemical Method) 1., baking sterilized with chemicals (Chemical technoinox vapor) which sterilization. Steaming hot water high-pressure steam (Steam Sterilization) is the most popular. It is convenient, safe and economical than other methods, however, navigation tools, and devices to sterilization. By steaming with hot steam to high pressure. Users need to have a deep understanding of the principles. Devices And how to use it as well. The equipment used for steamed hot high pressure is. Autoclave sterilized (Autoclave) Principles of Autoclave principles of steaming hot water high-pressure steam (Autoclave) is to have the desired sterilization into the room with heat. And pressure of water vapor above normal atmospheric conditions for a period of time. Steam sterilization is generally used at 121 C under a steam pressure of 15 pounds per square inch. The duration 15 minutes if the temperature is very high. And vapor pressure greater than 15 pounds per square inch. May adversely affect the device as a metal. Because of the high temperatures will cause too much metal has changed and shortened lifespan. Including vapor pressure that is too high can cause metal to rust and corrosion. (Although a short period technoinox of time) duration of steaming as mentioned. At the chamber temperature and pressure of the steam is prescribed only. No time to prepare a steaming temperature and pressure as required.
Autoclave a new type of Autoclave equipment used for sterilization is that air Autoclave Autoclave Systems Gravity: The Autoclave small with a capacity technoinox not exceeding 20 liters (often used in the laboratory) qualified as follows: 1., If. 121 C using steam pressure is 15 pounds per square inch. If the temperature is 134 degrees Celsius steam pressure is 30 pounds / square inch automatically (when steamed in normal atmospheric pressure). 2 do not need to have all the air out of the room to one ŭ.